It is a compact handheld tester with the fastest microprocessor on the market. Also you will be able to measure pH, EC (conductivity) and TDS with a single instrument and a single probe.
Milwaukee 12880 µS/cm Calibration Solution is a laboratory-grade 12880 µS/cm conductivity standard solution , prepared from a NIST-traceable potassium chloride solution, that allows you to recalibrate your conductivity meter or tester. conductivity .
Milwaukee 's 800 ppm Calibration Solution is a standard, laboratory-grade 800 ppm TDS solution , prepared from a NIST-traceable potassium chloride solution, that allows you to recalibrate your conductivity meter or tester. Consult your conductivity meter or tester manual to find the correct standard for your device.
The Milwaukee CO2 Solenoid Valve is a high quality solenoid valve that is safe and completely reliable for controlling CO2 addition in aquariums and reverse osmosis. It controls the CO2 supply.
Milwaukee CD601 is a conductivity tester specifically designed for water analysis.The calibration procedure is very simple and quick.This tester has automatic temperature compensation, 10 uS/cm resolution and a range of 0 to 1990 uS/cm.CD601 comes complete with protective cap, calibration screwdriver, batteries and instructions.
This pH meter, model pH600 from Milwaukee is easy to use: it allows you to measure the pH without any difficulty . Light, compact and fast, the pH value is displayed instantly: it is the ideal object for your terrarium or your aquarium!
The CD600 is a TDS tester specially designed for water analysis . The calibration procedure is very simple and quick . This tester has automatic temperature compensation, 10ppm resolution and 0-1990ppm range. The CD600 is supplied with a protective cap, calibration screwdriver, batteries and instructions.
Fresh-Start from Milwaukee is a set of pH calibration and electrode rinse solutions designed to optimize the accuracy of your measurements and prevent cross-contamination between samples or calibration solutions. (pH 4.01: 5 sachets, pH 7.01: 10 sachets, pH 10.01: 5 sachets, cleaning solution: 5 sachets)
MA9011 is a reagent grade pH and ORP electrode filling solution that contains 3.5M KCl. This filling solution is specifically formulated for double junction electrodes. Double junction electrodes have two chambers. The inner chamber has an Ag/AgCl reference wire and a KCl + AgCl filling solution. The outer chamber contains a KCl filling solution.
The new Milwaukee MC1200 Aquarium pH Controller with Plug gives you the option to choose whether the electrical output is active at a pH above or below the set point . Fixing to the wall for continuous use .
The Milwaukee MC125 PRO pH and ORP Controller is designed for those who want to automatically measure and adjustpH and ORP levels with one simple controller. Simply set your pH and ORP settings and let the Milwaukee pH Controller do the rest.
Milwaukee MP810 peristaltic dosing pump with constant dosing rate of 1.5 L/h (25 mL/min). No regulation possible. Maximum pressure of 2 bars. Made of polypropylene. Delivered with its accessories (tubes, filter, injection connector) in a cardboard box. Can be connected to an MC122 pH controller .
Milwaukee MP815 peristaltic metering pump with adjustable metering flow from 0 to 2.2 L/h (0 to 37 mL/min). Maximum pressure of 2 bar. Made of polypropylene. Delivered with its accessories (tubes, filter, injection connector) in a cardboard box. Can be connected to an MC122 pH controller .
MW12 from Milwaukee is a digital photometer for phosphates , just add the reagent and get an accurate digital reading of ±0.04 ppm in minutes. Ideal for aquariums, aquaculture and corals, laboratories, water treatment, classrooms...
MW301 from Milwaukee is a portable conductivity meter with automatic temperature compensation . This equipment has been designed to meet the needs of growers for equipment adapted to the harsh environment of agricultural and hydroponic applications .
Milwaukee portable luxmeterequipped with a waterproof probe , allowing to measure the light intensity .It comes with a light sensor connected to the device which measures from 0 to 50000 Lux.
MA9020 is a laboratory grade 200-275 mV ORP solution certified to meet the range.
MA9020 is used to check the health and accuracy of an ORP electrode. Milwaukee solutions are designed to help you achieve reliable and repeatable redox measurements.
The electrode rinse solution is ideal for use as an intermediate rinse between samples or calibration solutions to prevent cross-contamination. This flushing solution is also ideal for removing the buildup of basic salt deposits on the probe or cap caused by evaporation of the storage solution. Even though the accumulation of salt deposits is normal, they must be removed before measuring or calibrating. Electrode rinse solution should not replace cleaning or storage solutions.
MA9015 is a laboratory grade electrode storage solution prepared with premium chemicals to improve performance and extend the life of your pH and ORP electrodes, testers and pens.
Milwaukee solutions are designed to help you achieve reliable, repeatable pH measurements while extending the life of your electrode.
The Milwaukee pH Meter and Temperature Tester (pH55) is a pocket-sized digital meter, waterproof IP67 with LCD digital screen on which the pH and the measured temperature (°C or °F) are displayed on two separate lines.
Milwaukee Phosphate Reagent MI512-0includes high quality reagents that are ready to use with the Milwaukee MW12 Low-Range Phosphate Tester . Reagents and tester use adaptation of ascorbic acid method. The reagents are designed for use with samples that have an expected range of 0.00 to 2.50 ppm (mg/L) PO4.
The refractometer is an optical instrument that uses refractive index measurement to determine the salinity of natural and artificial seawater, seawater or brackish intermediates.
The SE510 Conductivity (EC)/Total Dissolved Solids (TDS) probe is designed for use with the Milwaukee MW301 and MW401 PRO conductivity meters. This probe has a DIN connector and a 3' (1 m) cable.
MA9010 is a laboratory grade pH 10.01 buffer solution certified to the standard with an accuracy of ±0.01 pH eliminating inaccuracies associated with mixing buffers.
Milwaukee solutions are designed to help you achieve reliable, repeatable pH measurements while extending the life of your electrode.
MA9004 is a laboratory grade pH 4.01 buffer solution certified to the standard with an accuracy of ±0.01 pH eliminating inaccuracies associated with mixing buffers.
Milwaukee solutions are designed to help you achieve reliable, repeatable pH measurements while extending the life of your electrode.
MA9007 is a laboratory grade pH 7.01 buffer solution certified to the standard with an accuracy of ±0.01 pH eliminating inaccuracies associated with mixing buffers.
Milwaukee solutions are designed to help you achieve reliable, repeatable pH measurements while extending the life of your electrode.
Milwaukee TH310 stick thermometer . Scientists and lab technicians when performing repetitive measurements rely on the accuracy of their thermometers. For this reason, Milwaukee has developed the TH310, a reliable, pocket-sized thermometer that is intended to make glass thermometers obsolete.
